Qingdao Tengjun Hardware Co.,Ltd|rigging|stamping part|casting part

Home | ContactUs | E-mail

stainless steel products

other

Chain

Steel Chain

Stainless Steel Chain

Address: NO.685 Yanqing
                   Road,Qingdao, China
Tel:         86-532-88512018
                86-13969633559
Fax:         86-532-88512018
Contact: Ms.Helen Zhao
E-mail:   renjie819@126.com
E-Mail:   chinatengjun@126.com
msn:renjie8192000@hotmail.com
Skype:   renjie819
Web:    www.chinatengjun.com

Home > Products > turnbuckle

Product

US TYPE DROP FORGED TURNBUCKLE

HOOK AND EYE
Hot dip galvanized End fittings are quenched and tempered bodies are normalized Proof load is 2.5 times working load limit Ultimate load is 5 times working load limit

Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	Dimensions (in)
Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	A	B	C Closed	D Open	E Closed	F	G	H	K	P Closed
1/4 x 4	400	0.30	0.25	0.45	1.59	11.94	7.94	1.27	4.00	0.78	0.34	1.75
5/16 x 4 1/2	700	0.47	0.31	0.50	1.94	13.81	9.31	1.50	4.50	0.94	0.44	2.09
3/8 x 6	1000	0.75	0.38	0.56	2.30	17.72	11.72	1.77	6.00	1.12	0.53	2.52
1/2 x 6	1500	1.60	0.50	0.66	2.94	19.38	13.38	2.28	6.00	1.44	0.72	3.23
1/2 x 9	1500	1.83	0.50	0.66	2.94	25.38	16.38	2.28	9.00	1.44	0.72	3.23
1/2 x 12	1500	2.08	0.50	0.66	2.94	31.38	19.38	2.28	12.00	1.44	0.72	3.23
5/8 x 6	2250	2.75	0.63	0.84	3.69	21.25	15.25	2.81	6.00	1.75	0.88	3.90
5/8 x 9	2250	3.13	0.63	0.84	3.69	27.25	18.25	2.81	9.00	1.75	0.88	3.90
5/8 x 12	2250	3.50	0.63	0.84	3.69	33.25	21.25	2.81	12.00	1.75	0.88	3.90
3/4 x 6	3000	3.89	0.75	0.98	4.52	23.28	17.28	3.33	6.00	2.09	1.00	4.69
3/4 x 9	3000	4.61	0.75	0.98	4.52	29.28	20.28	3.33	9.00	2.09	1.00	4.69
3/4 x 12	3000	5.43	0.75	0.98	4.52	35.28	23.28	3.33	12.00	2.09	1.00	4.69
3/4 x 18	3000	7.25	0.75	0.98	4.52	47.28	29.28	3.33	18.00	2.09	1.00	4.69
7/8 x 12	4000	8.10	0.88	1.13	5.19	37.00	25.00	3.78	12.00	2.38	1.25	5.10
7/8 x 18	4000	9.95	0.88	1.13	5.19	49.00	31.00	3.78	18.00	2.38	1.25	5.10
1 x 6	5000	9.33	1.00	1.25	5.84	26.69	20.69	4.25	6.00	3.00	1.44	6.36
1 x 12	5000	11.93	1.00	1.25	5.84	38.69	26.69	4.25	12.00	3.00	1.44	6.36
1 x 18	5000	14.00	1.00	1.25	5.84	50.69	23.69	4.25	18.00	3.00	1.44	6.36
1 x 24	5000	17.25	1.00	1.25	5.84	62.69	38.69	4.25	24.00	3.00	1.44	6.36
1 1/4 x 12	6500	19.00	1.25	1.50	7.22	41.56	29.56	5.13	12.00	3.56	1.81	7.72
1 1/4 x 18	6500	23.00	1.25	1.50	7.22	53.56	35.56	5.13	18.00	3.56	1.81	7.72
1 1/4 x 24	6500	27.00	1.25	1.50	7.22	65.56	41.56	5.13	24.00	3.56	1.81	7.72
1 1/2 x 12	7500	27.50	1.50	1.88	8.34	44.44	32.44	5.75	12.00	4.06	2.12	8.62
1 1/2 x 18	7500	31.00	1.50	1.88	8.34	56.44	38.44	5.75	18.00	4.06	2.12	8.62
1 1/2 x 24	7500	37.50	1.50	1.88	8.34	68.44	44.44	5.75	24.00	4.06	2.12	8.62
Conforms to Federal Specification FF-T-791b, Type 1, Form 1 - Class 2

EYE AND JAW
Hot dip galvanized End fittings are quenched and tempered bodies are normalized Proof load is 2.5 times working load limit Ultimate load is 5 times working load limit

Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	Dimensions (in)
Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	A	B	C	D Open	E Closed	F Closed	G	H	K	P Closed
1/4 x 4	500	0.32	0.25	0.41	0.62	12.07	8.07	1.58	4.00	0.78	0.34	1.75
5/16 x 4 1/2	800	0.47	0.31	0.47	0.87	14.01	9.51	1.98	4.50	0.94	0.44	2.09
3/8 x 6	1200	0.76	0.38	0.50	0.87	17.77	11.77	2.12	6.00	1.12	0.53	2.52
1/2 x 6	2200	1.53	0.50	0.63	1.06	19.48	13.48	2.75	6.00	1.44	0.72	3.23
1/2 x 9	2200	1.71	0.50	0.63	1.06	25.48	16.48	2.75	9.00	1.44	0.72	3.23
1/2 x 12	2200	2.06	0.50	0.63	1.06	31.48	19.48	2.75	12.00	1.44	0.72	3.23
5/8 x 6	3500	2.35	0.63	0.75	1.31	21.28	15.28	3.50	6.00	1.75	0.88	3.90
5/8 x 9	3500	3.06	0.63	0.75	1.31	27.28	18.28	3.50	9.00	1.75	0.88	3.90
5/8 x 12	3500	3.78	0.63	0.75	1.31	33.28	21.28	3.50	12.00	1.75	0.88	3.90
3/4 x 6	5200	4.00	0.75	0.94	1.50	23.11	17.11	4.18	6.00	2.09	1.00	4.69
3/4 x 9	5200	4.75	0.75	0.94	1.50	29.11	20.11	4.18	9.00	2.09	1.00	4.69
3/4 x 12	5200	5.36	0.75	0.94	1.50	35.11	23.11	4.18	12.00	2.09	1.00	4.69
3/4 x 18	5200	7.00	0.75	0.94	1.50	47.11	29.11	4.18	18.00	2.09	1.00	4.69
7/8 x 12	7200	8.00	0.88	1.13	1.75	36.57	24.57	4.85	12.00	2.38	1.25	5.10
7/8 x 18	7200	9.75	0.88	1.13	1.75	48.57	30.57	4.85	18.00	2.38	1.25	5.10
1 x 6	10000	8.92	1.00	1.19	2.06	26.89	20.89	5.53	6.00	3.00	1.44	6.36
1 x 12	10000	11.20	1.00	1.19	2.06	38.89	26.89	5.53	12.00	3.00	1.44	6.36
1 x 18	10000	13.30	1.00	1.19	2.06	50.89	32.89	5.53	18.00	3.00	1.44	6.36
1 x 24	10000	17.00	1.00	1.19	2.06	62.89	38.89	5.53	24.00	3.00	1.44	6.36
1 1/4 x 12	15200	20.00	1.25	1.75	2.81	42.05	30.05	7.21	12.00	3.56	1.81	7.72
1 1/4 x 18	15200	24.18	1.25	1.75	2.81	54.05	36.05	7.21	18.00	3.56	1.81	7.72
1 1/4 x 24	15200	28.50	1.25	1.75	2.81	66.05	42.05	7.21	24.00	3.56	1.81	7.72
1 1/2 x 12	21400	28.99	1.50	2.06	2.81	44.25	32.23	7.88	12.00	4.06	2.12	8.62
1 1/2 x 18	21400	35.00	1.50	2.06	2.81	56.25	38.25	7.88	18.00	4.06	2.12	8.62
1 1/2 x 24	21400	39.18	1.50	2.06	2.81	68.25	44.25	7.88	24.00	4.06	2.12	8.62

HOOK AND HOOK
Hot dip galvanized End fittings are quenched and tempered bodies are normalized Proof load is 2.5 times working load limit Ultimate load is 5 times working load limit

Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	Dimensions (in)
Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	A	B	C Closed	D Open	E Closed	F	G
1/4 x 4	400	0.30	0.25	0.45	1.59	11.94	7.94	1.27	4.00
5/16 x 4 1/2	700	0.47	0.31	0.50	1.94	13.81	9.31	1.50	4.50
3/8 x 6	1000	0.75	0.38	0.56	2.30	17.72	11.72	1.77	6.00
1/2 x 6	1500	1.60	0.50	0.66	2.94	19.38	13.38	2.28	6.00
1/2 x 9	1500	1.83	0.50	0.66	2.94	25.38	16.38	2.28	9.00
1/2 x 12	1500	2.08	0.50	0.66	2.94	31.38	19.38	2.28	12.00
5/8 x 6	2250	2.75	0.63	0.84	3.69	21.25	15.25	2.81	6.00
5/8 x 9	2250	3.13	0.63	0.84	3.69	27.25	18.25	2.81	9.00
5/8 x 12	2250	3.50	0.63	0.84	3.69	33.25	21.25	2.81	12.00
3/4 x 6	3000	3.89	0.75	0.98	4.52	23.28	17.28	3.33	6.00
3/4 x 9	3000	4.61	0.75	0.98	4.52	29.28	20.28	3.33	9.00
3/4 x 12	3000	5.43	0.75	0.98	4.52	35.28	23.28	3.33	12.00
3/4 x 18	3000	7.25	0.75	0.98	4.52	47.28	29.28	3.33	18.00
7/8 x 12	4000	8.10	0.88	1.13	5.19	37.00	25.00	3.78	12.00
7/8 x 18	4000	9.95	0.88	1.13	5.19	49.00	31.00	3.78	18.00
1 x 6	5000	9.33	1.00	1.25	5.84	26.69	20.69	4.25	6.00
1 x 12	5000	11.93	1.00	1.25	5.84	38.69	26.69	4.25	12.00
1 x 18	5000	14.00	1.00	1.25	5.84	50.69	23.69	4.25	18.00
1 x 24	5000	17.25	1.00	1.25	5.84	62.69	38.69	4.25	24.00
1 1/4 x 12	6500	19.00	1.25	1.50	7.22	41.56	29.56	5.13	12.00
1 1/4 x 18	6500	23.00	1.25	1.50	7.22	53.56	35.56	5.13	18.00
1 1/4 x 24	6500	27.00	1.25	1.50	7.22	65.56	41.56	5.13	24.00
1 1/2 x 12	7500	27.50	1.50	1.88	8.34	44.44	32.44	5.75	12.00
1 1/2 x 18	7500	31.00	1.50	1.88	8.34	56.44	38.44	5.75	18.00
1 1/2 x 24	7500	37.50	1.50	1.88	8.34	68.44	44.44	5.75	24.00

EYE AND EYE
Hot dip galvanized End fittings are quenched and tempered bodies are normalized Proof load is 2.5 times working load limit Ultimate load is 5 times working load limit

Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	Dimensions (in)
Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	A	D Open	E Closed	G	H	K	P Closed
1/4 x 4	500	0.30	0.25	12.25	8.25	4.00	0.78	0.34	1.75
5/16 x 4 1/2	800	0.47	0.31	14.12	9.62	4.50	0.94	0.44	2.09
3/8 x 6	1200	0.75	0.38	18.16	12.16	6.00	1.12	0.53	2.52
1/2 x 6	2200	1.60	0.50	19.96	13.96	6.00	1.44	0.72	3.23
1/2 x 9	2200	1.83	0.50	25.96	16.96	9.00	1.44	0.72	3.23
1/2 x 12	2200	2.08	0.50	31.96	19.96	12.00	1.44	0.72	3.23
5/8 x 6	3500	2.75	0.63	21.68	15.68	6.00	1.75	0.88	3.90
5/8 x 9	3500	3.13	0.63	27.68	18.68	9.00	1.75	0.88	3.90
5/8 x 12	3500	3.50	0.63	33.68	21.68	12.00	1.75	0.88	3.90
3/4 x 6	5200	3.89	0.75	23.62	17.62	6.00	2.09	1.00	4.69
3/4 x 9	5200	4.61	0.75	29.62	20.62	9.00	2.09	1.00	4.69
3/4 x 12	5200	5.43	0.75	35.62	23.62	12.00	2.09	1.00	4.69
3/4 x 18	5200	7.25	0.75	47.62	29.62	18.00	2.09	1.00	4.69
7/8 x 12	7200	8.10	0.88	36.82	24.82	12.00	2.38	1.25	5.10
7/8 x 18	7200	9.95	0.88	48.82	30.82	18.00	2.38	1.25	5.10
1 x 6	10000	9.33	1.00	27.72	21.72	6.00	3.00	1.44	6.36
1 x 12	10000	11.93	1.00	39.97	27.72	12.00	3.00	1.44	6.36
1 x 18	10000	14.00	1.00	51.72	33.72	18.00	3.00	1.44	6.36
1 x 24	10000	17.25	1.00	63.72	39.72	24.00	3.00	1.44	6.36
1 1/4 x 12	15200	19.00	1.25	42.56	30.56	12.00	3.56	1.81	7.72
1 1/4 x 18	15200	23.00	1.25	54.56	36.56	18.00	3.56	1.81	7.72
1 1/4 x 24	15200	27.00	1.25	66.56	42.56	24.00	3.56	1.81	7.72
1 1/2 x 12	21400	27.50	1.50	45.00	33.00	12.00	4.06	2.12	8.62
1 1/2 x 18	21400	31.00	1.50	57.00	39.00	18.00	4.06	2.12	8.62
1 1/2 x 24	21400	37.50	1.50	69.00	45.34	24.00	4.06	2.12	8.62

JAW AND JAW
Hot dip galvanized End fittings are quenched and tempered bodies are normalized Proof load is 2.5 times working load limit Ultimate load is 5 times working load limit

Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	Dimensions (in)
Thread Dia & Take Up	Working Load Limit(lbs)	Weight Each (lbs)	A	B	C	D Open	E Closed	F Closed	G
1/4 x 4	500	0.36	0.25	0.41	0.62	11.90	7.90	1.58	4.00
5/16 x 4 1/2	800	0.52	0.31	0.47	0.87	13.90	9.40	1.98	4.50
3/8 x 6	1200	0.81	0.38	0.50	0.87	17.38	11.38	2.12	6.00
1/2 x 6	2200	1.50	0.50	0.63	1.06	19.00	13.00	2.75	6.00
1/2 x 9	2200	1.74	0.50	0.63	1.06	25.00	16.00	2.75	9.00
1/2 x 12	2200	2.40	0.50	0.63	1.06	31.00	19.00	2.75	12.00
5/8 x 6	3500	2.72	0.63	0.75	1.31	20.88	14.88	3.50	6.00
5/8 x 9	3500	3.24	0.63	0.75	1.31	26.88	17.88	3.50	9.00
5/8 x 12	3500	3.74	0.63	0.75	1.31	32.88	20.88	3.50	12.00
3/4 x 6	5200	4.11	0.75	0.94	1.50	22.60	16.60	4.18	6.00
3/4 x 9	5200	5.10	0.75	0.94	1.50	28.60	19.60	4.18	9.00
3/4 x 12	5200	1.65	0.75	0.94	1.50	34.60	22.60	4.18	12.00
3/4 x 18	5200	7.00	0.75	0.94	1.50	46.60	28.60	4.18	18.00
7/8 x 12	7200	8.17	0.88	1.13	1.75	36.32	24.32	4.85	12.00
7/8 x 18	7200	9.96	0.88	1.13	1.75	48.32	30.32	4.85	18.00
1 x 6	10000	8.50	1.00	1.19	2.06	26.06	20.06	5.53	6.00
1 x 12	10000	12.00	1.00	1.19	2.06	38.06	26.06	5.53	12.00
1 x 18	10000	14.00	1.00	1.19	2.06	50.06	32.06	5.53	18.00
1 x 24	10000	17.00	1.00	1.19	2.06	62.06	38.06	5.53	24.00
1 1/4 x 12	15200	21.50	1.25	1.75	2.81	41.54	29.54	7.21	12.00
1 1/4 x 18	15200	24.25	1.25	1.75	2.81	53.54	35.54	7.21	18.00
1 1/4 x 24	15200	28.00	1.25	1.75	2.81	65.54	41.54	7.21	24.00
1 1/2 x 12	21400	30.50	1.50	2.06	2.81	43.50	31.50	7.88	12.00
1 1/2 x 18	21400	36.75	1.50	2.06	2.81	55.50	37.50	7.88	18.00
1 1/2 x 24	21400	40.67	1.50	2.06	2.81	67.50	43.50	7.88	24.00

STUB END

Tread Dia & Take Up	Working Load Limit (lbs)	Weight Per 100 (lbs)	Dimensions (in)
Tread Dia & Take Up	Working Load Limit (lbs)	Weight Per 100 (lbs)	A	B	C	D	E	F
3/8 x 6	1200	0.75	0.38	6.00	7.13	0.56	4.44	16.00
1/2 x 6	2200	1.25	0.50	6.00	7.50	0.75	4.25	16.00
5/8 x 6	3500	2.11	0.63	6.00	7.88	0.94	4.06	16.00
3/4 x 6	5200	3.27	0.75	6.00	8.25	1.13	4.38	17.00
7/8 x 6	7200	4.78	0.88	6.00	8.63	1.31	4.69	18.00
1 x 6	10000	6.36	1.00	6.00	9.00	1.50	5.00	19.00
1 x 12	10000	8.80	1.00	12.00	15.00	1.50	5.00	25.00
1 1/8 x 6	12400	8.88	1.13	6.00	9.13	1.56	4.94	19.00
1 1/4 x 6	15200	10.18	1.25	6.00	9.13	1.56	5.44	20.00
1 1/4 x 12	15200	13.60	1.25	12.00	15.12	1.56	5.44	26.00
1 1/2 x 12	21400	20.44	1.50	12.00	15.75	1.88	5.38	26.50

TURNBUCKLE BODY

Size (in)	WLL (lbs)	Weight (lbs)	Dimensions (in)
Size (in)	WLL (lbs)	Weight (lbs)	A	B	C	D	E	F
1/4 x 4	500	0.15	4.75	4.00	0.72	0.34	0.50	0.38
5/16 x 4 1/2	800	0.19	5.44	4.50	0.81	0.38	0.56	0.44
3/8 x 6	1200	0.29	7.12	6.00	0.88	0.38	0.62	0.50
1/2 x 6	2200	0.60	7.50	6.00	1.12	0.50	0.81	0.62
1/2 x 9	2200	0.68	10.50	9.00	1.12	0.50	0.81	0.62
1/2 x 12	2200	1.00	13.50	12.00	1.12	0.50	0.81	0.62
5/8 x 6	3500	0.90	7.88	6.00	1.38	0.62	1.00	0.75
5/8 x 9	3500	1.18	10.88	9.00	1.38	0.62	1.00	0.75
5/8 x 12	3500	1.43	13.88	12.00	1.38	0.62	1.00	0.75
3/4 x 6	5200	1.30	8.25	6.00	1.69	0.75	1.12	0.94
3/4 x 9	5200	1.75	11.25	9.00	1.69	0.75	1.12	0.94
3/4 x 12	5200	2.08	14.25	12.00	1.69	0.75	1.12	0.94
3/4 x 18	5200	2.50	20.25	18.00	1.69	0.75	1.12	0.94
7/8 x 12	7200	2.70	14.62	12.00	1.94	0.88	1.31	1.06
7/8 x 18	7200	3.80	20.62	18.00	1.94	0.88	1.31	1.06
1 x 6	10000	2.48	9.00	6.00	2.25	1.00	1.50	1.25
1 x 12	10000	3.93	15.00	12.00	2.25	1.00	1.50	1.25
1 x 18	10000	5.28	21.00	18.00	2.25	1.00	1.50	1.25
1 x 24	10000	7.38	27.00	24.00	2.25	1.00	1.50	1.25
1 1/4 x 12	15200	5.25	15.12	12.00	2.62	1.25	1.88	1.50
1 1/4 x 18	15200	7.75	21.12	18.00	2.62	1.25	1.88	1.50
1 1/4 x 24	15200	10.17	27.12	24.00	2.62	1.25	1.88	1.50